Ten Things to Keep in Mind at Planting

Agronomy

Planting is the most important trip you’ll make across your fields each year. Some of the biggest and most impactful steps you can take toward reaching your yield potential are completed as soon as your planter leaves the field.

FBN corn planter plantingHere are 10 things you’ll want to consider before your planter hits the field.

1. Soil temperature

Corn can germinate at 50 degrees Fahrenheit, which is one reason that soil temperature is important. Don’t get underway with planting until the average daily temperature reaches 50 degrees, and future temperatures are predicted to be adequate for maintaining or increasing that soil temperature.

2. Soil moisture

Soil moisture is also a must for germination and uniform crop emergence. By placing corn seed into adequate moisture, you have a greater chance of achieving even germination and emergence. During drought years, pre-irrigating soils can eliminate moisture deficit problems. In wet years, be careful driving equipment across the field so you don’t create added soil compaction.

3. Weather forecast

Keep a close watch on upcoming weather and how it could affect planted seed. For example, if heavy rains are in the forecast, it may be a good idea to delay planting for a slightly later date. Wait to begin planting until future frost chances are low. 

4. Soil type

Soil type should also be a consideration when planting. Sandy soils tend to warm up faster than clay soils and have less nutrient and water holding capacity. In some cases, it may be better to plant the sandy soil fields first, as those soils may be drier and warmer.

5. Crusting probability

Some fields are prone to crusting issues. If that sounds like some of your fields, consider planting when less rainfall is in the forecast. Keep in mind that scouting emergence issues and taking appropriate action can usually help to alleviate crusting.

6. Emergence vigor

Choose corn hybrids rated high in seedling vigor in order to establish the uniform final population desired. This is especially important on farms with a history of soil crusting or when hard rains and high temperatures are in the forecast.

 

Read this next: Do These Five Things to Ready Your Planter (3 min read)

 

7. Planting depth

Because corn seed imbibes 30 percent of its weight in water to achieve germination, corn should be a half-inch below the soil moisture line to ensure adequate moisture is available.

Most seed companies and agronomists agree that corn seed should be planted at a depth between one-and-a-half inches and two-and-a-half inches. This depth will ensure that the nodal roots will develop at least three-quarters of an inch below the soil surface. The nodal roots are critical to the heathy establishment of the corn plant’s root system, as they supply the plant with nearly all nutrients during the first two weeks of seedling emergence. When the nodal roots are exposed to heat and air, the root system becomes compromised, reducing nutrient availability and resulting in yield reduction.

8. Seed-to-soil contact

Firm seed-to-soil contact is essential. This will protect against inhibited root growth due to air pockets in the soil and will assist in water availability to begin germination.

9. Planting date

When planting dates are later than in previous years, some farmers are prone to rush, often planting into soil conditions that are less than ideal. Any yield loss seen from later planting is often less costly than the soil issues that can result from early planting into poor conditions.

10. Crop residue

Crop residue can impact seed depth, seed-to-soil contact and soil temperature. “Hairpinning” corn seed into previous crop residue is a common problem when planting into both no-till cropping systems and conventional tillage. This can result in skips of the final stand and cause delayed seedling emergence.


And, finally, don’t panic.

Keep all these factors in mind, but remember that common sense plays an important role in determining what is best for every scenario.

Always have your planting equipment in the best condition possible. Take time to check behind the planter and make any adjustments necessary to accomplish your final stand population. Monitors do not find all planter issues.

And when in doubt, remember that making the right planting decisions is what helps you reach your maximum yield potential.
Farmers are doing their own experiments, and using FBN to do it.on-farm field trials guide

ALWAYS READ AND FOLLOW LABEL DIRECTIONS. It is a violation of federal and state/provincial law to use any crop protection product other than in accordance with its label. The distribution, sale and use of an unregistered pesticide is a violation of federal and/or state law and is strictly prohibited. It is your responsibility to confirm prior to purchase and use that a product is labeled for your specific purposes, including, but not limited to, your target crop or pest and its compatibility with other products in a tank mix.

 

Get The Latest